-
1.
Mount - Fix your camera to a tripod and loosen both sets of rear standard knobs
-
2.
Pull up - gently push front forwards and raise back up to 90ยบ
-
3.
Tighten - lock the back into place by turning both sets of rear standard knobs
-
4.
Front - Loosen front standard knobs and pull the front of the camera up
-
5.
Attach - Find centre notch and screw front standard into the base
-
6.
Zero - Tighten front knobs and make sure everything is in-line
-
7.
Check - Make sure everything is tight and secure then you're good to go!